Deploying Unified Access Gateway Appliance

Now that you have configured the INI file for your Unified Access Gateway deployment, the next step is to execute the PowerShell script passing the INI as a paratemer.

1. Open PowerShell window

Open PowerShell

Click on the PowerShell icon

2. Deploying Unified Access Gateway via PowerShell

Running the script

As the scripts starts a couple questions will be asked, follow the steps below in order to provide the correct information.

  1. Enter cd '.\Desktop\UAG Resources' then press ENTER.
  2. Enter .\uagdeploy.ps1 .\uag-Tunnel.ini VMware1! VMware1! false false no then press ENTER.
    The first VMware1! is the root password for the UAG appliance
    The second VMware1! is the admin password for the REST API management access
    The first false is to NOT skip the validation of signature and certificate
    The second false is to NOT skip SSL verification for the vSphere connection
    The no is to not join the VMware CEIP program
  3. Enter [email protected]! as the password for the SSLcert and SSLcertAdmin fields when prompted.
  4. Enter VMware1! as the password for your Workspace ONE UEM administrator account (Your VLP Email Address) to allow Unified Access Gateway to be obtain the VMware Tunnel Settings from Workspace ONE UEM.

To avoid password request for the certificate, remove the pfxCerts values and provide a PEM certificate, set the pemCerts and pemPrivKey for the SSLCert and SSLCertAdmin sections of the INI file.

The deployment starts and you can follow the progress on the same window or on your vSphere Web Client.

3. Confirm the PowerShell Script Deployment Completes

Deployment finished
  1. Confirm the deployment has been completed successfully.  The Completed successfully text will be shown in the output.
  2. Click Close.

After successfully finalized the deployment the script will automatic Power on the VM UAG-2NIC-TUNNEL.

The Received IP address presented by the script log is a temporary IP, the final IPs for NIC one and NIC two will be assigned to the Unified Access Gateway Appliance during the first start. You can return to the vSphere Web Client to validate that as described on the next step.

4. Validate Unified Access Gateway Deployment

Validating UAG Appliance status
  1. If you do not see the UAG-2NIC-TUNNEL VM under Nested_Datacenter, you may need to click Refresh.
  2. Click on UAG-2NIC-TUNNEL.
  3. Click the Summary tab.
  4. Click on View all 2 IP addresses.
  5. The IP Addresses should show:
    192.168.110.20
    172.16.0.20

 

Note - In case the Unified Access Gateway appliance have not finalized the configuration during the first startup, you will receive a error message from vSphere Web Client.  If that happen wait for the Appliance to finalized and refresh the whole Chrome Browser.

0 Comments

Add your comment

E-Mail me when someone replies to this comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.