Enroll Class Devices

You are now going to enroll your iOS device for use with this module.

1. Download/Install AirWatch MDM Agent Application from App Store - IF NEEDED

Download/Install AirWatch MDM Agent Application from App Store - IF NEEDED

NOTE - Checked out devices will likely have the AirWatch MDM Agent already installed. You may skip this step if your device has the AirWatch MDM agent installed.

At this point, if using your own iOS device or if the device you are using does NOT have the AirWatch MDM Agent Application installed, then install the AirWatch Application.

To Install the AirWatch MDM Agent application from the App Store, open the App Store application and download the free AirWatch MDM Agent application.

2. Launching the AirWatch MDM Agent

Launching the AirWatch MDM Agent

Launch the AirWatch Agent app on the device.  

NOTE - If you have your own iOS device and would like to test you will need to download the agent first.

3. Choose the Enrollment Method

Click on the Server Details button.

4. Find your Group ID from AirWatch Console

Finding your Group ID

 

  1. To find the Group ID, hover your mouse over the Organization Group tab at the top of the screen. Look for the email address you used to log in to the lab portal.
  2. Your Group ID is displayed at the bottom of the Organization Group pop up.

NOTE - The Group ID is required when enrolling your device in the following steps.

5. Attach the AirWatch MDM Agent to the HOL Sandbox

Once the Agent has launched you can enroll the device.  To do so, follow the below steps.

  1. Enter labs.awmdm.com for the Server field.
  2. Enter your Group ID for your Organization Group for the Group ID field.  Your Group ID was noted previously in the Finding your Group ID step.
  3. Tap the Go button.

NOTE - If on an iPhone, you may have to close the keyboard by clicking Done in order to click the Continue button.

6. Authenticate with AirWatch MDM

Authenticate the AirWatch MDM Agent

On this screen, enter the Username and Password as shown below.  

NOTE - You will need to enroll one device as "imateacher" and another device as "imastudent" in order to complete the lab.

  1. Type in the Basic User Account Username i.e. imateacher
  2. Type in the Basic User Account Password. This should be VMware1!
  3. Tap the Go button.

7. Redirect to Safari and Enable MDM Enrollment in Settings

The AirWatch Agent will now redirect you to Safari and start the process of enabling MDM in the device settings.

Tap on Redirect & Enable at the bottom of the screen.

8. Install the MDM Profile

Install the MDM Profile

Tap Install in the upper right corner of the Install Profile dialog box.

9. Install and Verify the AirWatch MDM Profile

Install and Verify the AirWatch MDM Profile

Tap Install when prompted at the Install Profile dialog.

NOTE - If a PIN is requested, it is the current device PIN. Provided VMware devices should not have a PIN.

10. iOS MDM Profile Warning

iOS MDM Profile Warning

You should now see the iOS Profile Installation warning explaining what this profile installation will allow on the iOS device.

Tap Install in the upper-right corner of the screen.

11. Trust the Remote Management Profile.

You should now see the iOS request to trust the source of the MDM profile.

Tap Trust when prompted at the Remote Management dialog.

12. iOS Profile Installation Complete

You should now see the iOS Profile successfully installed.

Tap Done in the upper right corner of the prompt.

13. AirWatch Enrollment Success

AirWatch Enrollment Success

Your enrollment is now completed. Tap Open to navigate to the AirWatch Agent.

14. Accept the Authentication Complete Prompt

Click on Done to continue.

15. Accept Notification Prompt (IF NEEDED)

Tap Allow if you get a prompt for Notifications.

16. Accept the App Installation (IF NEEDED)

Accept the App Installation (IF NEEDED)

You may be prompted to install a series of applications depending on which Module you are taking. If prompted, tap Install to accept the application installation.

17. REMINDER - Enroll TWO Devices

Authenticate the AirWatch MDM Agent

REMINDER - You will need to enroll one device as "imateacher" and another device as "imastudent" in order to complete the lab.

Please ensure you have completed the "ENROLL CLASS DEVICES" section twice and have a device enrolled as the teacher and another enrolled as the student!

  1. Type in the Basic User Account Username i.e. imastudent
  2. Type in the Basic User Account Password. This should be VMware1!
  3. Tap the Go button.

18. OPTIONAL - Validate Education Profile

OPTIONAL - Validate Education Profile

On either the Student or Teacher iPad:

  1. Click on the Settings app
  2. Click on General then scroll and click Profiles & Device Management
  3. Click the Workspace Services profile
  4. Click More Details
  5. Note the Education Configuration profile (e.g AirWatch School Manager####)